TwinCAT Valve Diagram Editor

In order to linearise non-linear characteristic curves of hydraulic valves, a velocity curve that has been measured for the output voltages has to be read in and approximated by a characteristic curve. The measured characteristic curve is displayed in the TwinCAT Valve Diagram Editor and can easily be linearised graphically. Only a few reference points are required. A straight line or a 5th degree polynomial is placed between these reference points. The determined characteristic linearisation is then loaded into the TwinCAT NC real-time and taken into account when the voltages are output in the drive. Online monitoring is possible at any time.

Ordering information
TwinCAT Valve Diagram Editor	licence for using the TwinCAT Valve Diagram Editor for designing the characteristic curve of a hydraulic valve